Engineering and Educational Technologies at Electrical and Computer Systems [Online journal].
Quarterly theoretical and practical journal. – Kremenchuk: KrNU, 2013. – Iss. 1/2013 (1).
– Access mode:

Download journal apparatus

TO READERS OF THE «Engineering and Educational Technologies at Electrical and Computer Systems» (download)

Electromechanical systems and automation. Electric machines and apparatus. Energetics

T. Korenkova, V. Kovalchuk (download)

The possibility of determining pump complexes parameters based on energy balance equations of instantaneous power components has been proved. A system of identification equations of an idealized pump unit, working on a pipe network with back pressure has been received. It has been noted that the proposed energy approach could be used for solving technological nonlinearity identification problems.

Key words: instantaneous power, the energy balance equations, the energy criterion, identification of parameters, equivalent circuit, the pump complex.

1. Vishnevskiy К.P. Transients in pressurized water supply systems. – М.: Agropromizdat,  1986. – 135 p. [in Russian]

2. Korenkova T.V., Kovalchuk V.G. Characteristics of the energy conversion process in electromechanical complexes // Electromechanical and Energy Saving up Systems. – Kremenchuk: KrNU, 2011. – № 4/2011 (16). – РР. 93–98. [in Russian]

3. Romashihin Yu.V., Rodkin D.I., Kalinov A.P. Energy method of identification of induction motors parameters // Transaction KSPU. – Kremenchuk: KSPU, 2007. – Iss. 3/2007 (44). – РР. 130–136. [in Russian]

4. Rodkin D.I., Romashihin Yu.V. Capabilities and efficiency of energydiagnostics method in identifying problems // XIV International Scientific Conference "Problems of automatic electric drive. Theory and applications": Scientific papers. – Dniprodzerzhinsk: DNTU, 2007. – PP. 507–512.

5. Rodkin D.I. Comment on the energy processes theory with polyharmonic signals. Part 2. The definition and using of energy mode indicators // Transaction KSPU. – Kremenchuk: KSPU, 2005. – Iss. 3/2005 (32). – РР. 106–115. [in Russian]

6. Zagirnyak M., Rod’kin D., Korenkova T. Enhachement of instantaneous power method in the problems of estimation of electromechanical complexes power controllability // Przeglad Elektrotechniczny (Electrical review), 2011. – № 12b. – PP. 208–212.

7. Kostyshin V.S Simulation of centrifugal pumps modes based on an electro-hydraulic analogy: monograph. – Ivano-Frankivsk, 2000. – 163 p. [in Russian]

N. Istomina (download)

The switching type influence on speed-torque and energy characteristics of the switched reluctance motor of average power with configuration 6/4 are researched. It is proved that asymmetrical switching using allows to increase efficiency for 17 %. The expediency of asymmetrical switching using under start-up and overload operating is proved.

Key words: switched reluctance motor, asymmetrical switching, phases efficiency, electric drive efficiency.

1. Ilyinckiy N.F. Electric drive in up-to-date world // Collected of V International (XVI All-Russian) Scientific Conference, 18–21 September. – SPb., 2007. – PP. 17–19. [in Russian]

2. Bychkov M. Switched Reluctance Electric Drive: Up-to-date State and Prospect Trends [Online resource] // Journal-guide «Market of Electrical Engineering». – Access mode: magazine/readem0207/10. [in Russian]

3. Ilyinckiy N.F. Switched Reluctance Electric Drive – Prospect Trends // Bulletin of Kharkov Polytechnic Institute. – Kharkov, 2002. – Vol. 1. – PP. 42–43. [in Russian]

4. Switched Reluctance Motor Drives [Online resource] // Official site of «Fleadh Electronics. Specialists in Green Power Electronics». – Access mode:

5. Switched Reluctance Motor [Online resource] // Official site of University of Technology Sydney. Electrical Energy Technology. – Access mode:

6. Switched Reluctance Motors [Online textbook] / V.A. Kuznecov, V.A. Kuzmichev. – Access mode: [in Russian]

7. Designing of Switched Reluctance Motors: Workbook / V.G. Fisenko, A.N. Popov. – M.: Publishing house of Moscow Energetic Institute, 2005. – 56 p. [in Russian]

8. Catalogue of production ООО «UralRegionGrupp»: Electric Traction Motors [Online resource]. – Access mode: [in Russian]

9. Tkachuk V.I. Electric Mechatronics: textbook. – Lviv: Publishing house of National University «Lvivska Politechnika», 2006. – 440 p. [in Ukrainian]

10. Controlled Alternating Current Drive / B.I. Firago, L.B. Pavliachyk. – Minsk: Technoperspectiva, 2006. – 363 p. [in Russian]

11. DiRenzo, Michael T. Switched Reluctance Motor Control – Basic Operation and Examples Using the TMS320F240 // Texas Instruments Incorporated. Application Report, SPRA420A. – February, 2000. – 62 p.

12. Duijsen, P.J. van. Multilevel Modeling and Simulation of a Switched Reluctance Mashine // Simulation Research. – The Netherlands, 2007. – 8 p.

13. Miller, T.J.E. Switched Reluctance Motors and their Control // Magna Physics & Clarendon Press. – Oxford, 1993. –PP. 257–262.

N. Rudenko, Yu. Romashykhin (download)

The features of the formation of the axial symmetry of the harmonic signal for a periodic signal and its further expansion in a Fourier series. Shows the versatility of the harmonic approximation to determine the cosine and sine components, as well as the values of the constant component of the periodic signal of any kind. To show that any part of any periodic signal can be represented as the sum of harmonic oscillations with frequencies that are multiples of the fundamental frequency of vibration.

Key words: Fourier series, periodic signal, harmonic signal, harmonic approximation, axial symmetry.

1. Handbook of electric machines: in 2 volumes / Ed. I.P. Kopylov. – Moskow: Energoatomizdat, 1988. – Iss. 1. – 456 p. [in Russian]

2. Filipetti F., Francescini G., Tassoni C. Recent developments of induction motor drives fault diagnoses using AI techniques // IEEE Transactions in Industrial electronics. – USA, 2000. – Iss. 47. – PP. 994–1004.

3. Kucheruk V.Y. Elements of the theory of building systems technical diagnostics of electric motor: Monograph. – Vinnitsa: Universum–Vinnitsa, 2003. – 195 p. [in Ukrainian]

4. Goldberg O.D. Testing of electrical machines: Studies. [for universities]. – Moscow: Visshaya shkola, 2000. – 255 p. [in Russian]

5. Method of calculating the equivalent circuit and starting characteristics glubokopaznyh asynchronous motors / V.F. Sivokobylenko, V.A. Pavlyukov, H. Henniui // Electrical Engineering. – 1996. – № 3. – PP. 38–41. [in Russian]

6. Romashihin Yu.V., Rodkin D.I. Methods for determining the parameters of AC machines // Transaction KSPU. − Kremenchug: KSPU, 2010. – Iss. 4/2010 (63), part 3. − PP. 140–143. [in Russian]

7. Rodkin D.I. Particularities of the using the energy method to identifications of induction motors at psevdopoligarmonical signal // Electromechanical and energysaving systems. – Kremenchuk: KDPU, 2009. – Iss. 1/2009 (5). – PP. 7–20. [in Russian]

8. Sergienko A.B. Digital signal processing: Textbook for universities. – SPb.: Piter,

2003. – 608 p. [in Russian]

9. Dadzhion D., Mercero R. Digital processing of multidimensional signals. – Moscow: Mir, 1988. – 488 p. [in Russian]

10. Baskakov S.I. Radio Circuits and Signals: A Textbook for university. – Moscow: Visshaya shkola, 1988. – 536 p. [in Russian]

11. Ignatov V.A. Information theory and signal transfer. – M.: Sovetskoye Radio, 1979. – 280 p. [in Russian]

12. Oppenheim A.V., Schafer R.W. Digital signal processing. – M.: Svyaz, 1979. – 416 p. [in Russian]

13. Percival, Donald B.; Andrew T. Walden. Spectral Analysis for Physical Applications: Multitaper and Conventional Univariate Techniques. Cambridge University Press, 1993. – PP. 190–195.

14. Mark G. Karpovsky, Radomir S. Stankovi´c, Jaakko T. Astola. Spectral Logic and Its Applications for the Design of Digital Devices. Published by John Wiley & Sons, Inc., Hoboken, New Jersey, 2008. – 598 p.

15. Radomir S. Stankovi´c, Claudio Moraga, Jaakko T. Astola. Fourier Analysis on Finite Groups with Applications in Signal Processing and System Design // Interscience Publishers. – New York, 2005. – 230 p.

16. Cooper J., McGillem A. Probabilistic methods of signals and systems analysis. – Moscow: Mir, 1989. – 376 p. [in Russian]

17. Patrick F. Dunn Measurement and Data Analysis for Engineering and Science. – New York: McGraw–Hill, 2005. – 540 p.

18. B. Boashash. Time-Frequency Signal Analysis and Processing: A Comprehensive Reference // Elsevier Science. – Oxford, 2003. – РР. 643–650.

19. Fihtengolc G. Course differential and integral calculus. – Moscow: Nauka, 1969. – Iss. 3. – 656 p. [in Russian]

20. Kalinov A.P., Layko V.V., Rodkin D.I. Spectral analysis of instantaneous power in the network with polyharmonic voltage and current // Bulletin KSPU. – Kremenchuk: Kremenchuk State Polytechnic University, 2006. – № 3/2006 (38), part 2. – PP. 59–72. [in Russian]

21. Sirotkin Y.I., Shaskolskaya M.P. Fundamentals of crystal physics. – Moscow: Nauka, 1979. – 640 p. [in Russian]

22. Prasolov V.V. Task of planimetry. – Moscow: MCNMO: JSC "Moskovskiye uchebniky", 2006. – 640 p. [in Russian]

23. Rodkin D.I., Kalinov A.P., Romashihin Yu.V. Development frequency methods parameter estimates of AC motors // Transaction KSPU. – Kremenchuk: KSPU, 2005. – № 3/2005 (33), part 2. – PP. 43–47. [in Russian]

24. Rodkin D.I. Use of psevdopolyharmonic signals in the problems of parameter identification of AC motors // Special issue "Problems of automated electric. Theory and practice" of research journal "ELEKTROINFORM". – Lviv: EKOinform, 2009. − РР. 29–39. [in Russian]

Yu. Zachepa (download)

The paper presents a refined method of calculation of the static characteristics of asynchronous generator at work on dynamic active-inductive load, adjusting the frequency of generated voltage. Found that the neglect of changes in the function of the frequency of the voltage load of low-power results in significant inaccuracies in determining the boundaries of stable operation. Based on experimental studies proved the adequacy of the proposed method.

Key words: autonomous asynchronous generator, capacitor bank, motor load, external characteristics.

1. Kitsis S.I. Self-excited asynchronous generator. – Мoskow: Energoatomizdat, 2003. – 328 p. [in Russian]

2. Zobaa A.F., Bansal R.S. Handbook of Renewable Energy Technology. – Singapore: World Scientific Publishing Co Pte. Ltd, 2011. – 851 p.

3. Toroptsev N.D. Asynchronous generators for autonomous power installations. – Мoskow: NТF «Energoprogres», 2004. – 87 p.

4. Lishchenko A.I., Lesnik V.A., Farenyk V.A. Study the performance of asynchronous generator with capacitive excitation // Technical Electrodynamics. – 1983. – № 5. – PP. 62–68. [in Russian]

5. Kyureghyan S.G., Tkachenko A.M. The calculation of the performance of autonomous asynchronous generator // Electrical engineering. – 1966. – № 11. – PP. 20–22. [in Russian]

6. Kitsis S.I. Calculation of stationary modes of asynchronous generator with field winding connected to the stator winding // Electricity. – 1978. – № 5. – PP. 28–31. [in Russian]

7. Balagurov V.A., Ketsaris A.A. Construction of the external characteristics of the asynchronous generator // Electrical engineering. – 1974. – № 2. – PP. 24–26. [in Russian]

8. Singh S.P., Jain M.P. Performance charakteristics and optimum utilization of a cage machine induction generator // IEEE Trans. on En. Conv. – 1990. – Iss. 5. – № 4. – PР. 679–685.

9. Williamson S. Induction motor modeling using finite elements / International Conf. on Electr. Mach., ICEM. – Paris, 1994. – Iss. 1. – PP. 1–8.

10. Gentkovski Z., Demenko А., Plahta B. Circuit-field model of the electromagnetic processes in the autonomous asynchronous generator with capacitor excitation // Technical electrodynamics, NAS of Ukraine. – Kiev, 1996. – № 1/2. – PP. 37–46. [in Russian]

11. Syromyatnikov I.A. Modes of asynchronous and synchronous motors / Ed. L.G. Mamikonyants. – M.: Energoatomizdat, 1984. – 528 p. [in Russian]

12. Sergienko S.A, Zachepa Yu.V. The method of calculation of the static characteristics of asynchronous generator with capacitive excitation // News of higher educational institutions and associations of the CIS energy. Energy. – 2012. – № 5. – PP. 57–66. [in Russian]

13. GOST 50783-95. Electrical apparatuses and mobile electric power from internal combustion engines. General requirements. – Moskow: Izd. standartov, 1995. – 27 p. [in Russian]

O. Bratash, A. Kalinov (download)

The article deals with the problem of the division of diagnostic signs of defects that cause the vibration on the rotational frequency and a double supply frequency. It is shown that the complex method of analysis using different vibration modes can improve the accuracy of the diagnosis of defects in blood pressure, which have similar diagnostic features.

Key words: induction motor, diagnosis, acceleration, spectral analysis.

1. Shearman A.R., Solovyov A.B. Practical vibration diagnostics and monitoring of mechanical equipment. Bybliogr. – M., 1996. – 276 p. [in Russian]

2. Barkov A.V., Barkov N.A Intelligent monitoring and diagnostics of machines for vibration // Proceedings of the St. Petersburg Institute Energy of professional development  Ministry of Energy of the Russian Federation and the United States Institute of vibration. – SPb., 1999. – Iss. 9. [in Russian]

3. Russov V.A. Spectral vibration diagnostics. – Perm, 1996. – 176 p. [in Russian]

4. Barkov A.V., Barkov N.A. Vibration diagnostics of machines and equipment. Vibration analysis: Manual. – SPb.: Publishing Center SPbSMTU, 2004. – 152 p. [in Russian]

5. Kostyukov V.N., Naumenko A.P. Рractical basis vibroacoustic diagnostics of machinery: the Manual. – Omsk: OmSTU, 2002. – 108 p. [in Russian]

6. GOST 13109–97. Interstate standard. Electrical energy. Electromagnetic compatibility standards of quality electric power supply systems in general. Introduced 1999 – 01 – 01. IPK Publishing House of the standards, 1999. – 32 р. [in Russian]

7. Goldin A. Мibration of rotating machines. – M.: Mashinostoyeniye, 1999. – 344 p.

8. Vibration power machines. A Reference Guide. / Ed. N.V. Grigoriev. – L.: Mashinostroyeniye, 1974. – 464 p. [in Russian]

9. Iorgulescu M., Beloiu R., Popescu M.O. Vibration monitoring for diagnosis of electrical equipment’s faults / 12th International Conference on Optimization of Electrical and Electronic Equipment, OPTIM 2010 IEEE. – Romania, Bucharest, 2010.

10. Condition Monitoring of Rotating Electrical Machines / Peter Tavner, Li Ran, Jim Penman, Howard Sedding. – United Kingdom, London: the Institution of Engineering and Technology, 2008.

11. Kalinov A.P., Mamchur D.G., Bratash O.V., Prostak O.I. Estimation of influence low-quality power to the vibration characteristics of induction motor // Transaction KSPU. Scientific papers KSPU. – Kremenchuk: KSPU, 2009. – Iss. 4/2009 (57). – РР. 78–81. [in Ukrainian]

V. Chenchevoy, D. Rodkin, V. Ogar (download)

An analytical expression for the determination of the iron loss of asynchronous machine is convenient for practical use and requires much less computational cost, compared to existing methods. The proposed method provides a relatively simple dependence with great precision to form and use the master control systems minimize losses electric drive, and can also be used to describe curves of the iron loss in the design of an autonomous power generation to determine the maximum load capacity of the generator set.

Key words: induction motor, saturation, iron loss.

1. Kadochnikov A.I., Korzunin G.S. Generic parameter domain structure soft magnetic materials and its use for the quantitative description of the family dynamic hysteresis loops // Solid State Physics. – 2000. – Iss. 42, № 11. – PР. 2054–2059. [in Russian]

2. Grechukhin V.N. Mathematical description of the hysteresis loop // Transaction ISPU. – 2005. – Iss. 1. – PP. 1–4. [in Russian]

3. Kandaurova G.S. Nature of the magnetic hysteresis // Soros. Educat. Journal. – 1997. – T. 1. – PP. 100–106. [in Russian]

4. Ogar V.A. By definition, the saturation of electric steel induction motors // Bulletin of Kirovohrad National Technical University. – 2004. – Iss. 15. – PP. 91–94. [in Russian]

5. Timofeev I.A. Specific losses in ferromagnet // Modern problems of science and education. – 2007. – № 6 – PP. 136–142. [in Russian]

6. Kanov L.N. Schematic simulation of nonlinear circuits AC // Bulletin SevGTU. Ser. Computer Science, Electronics, Communications: Collection of Scientific Papers. – Sevastopol, 2002. – Iss. 41. – PP. 151–155. [in Russian]

7. Petrov L.P. Launching control and inhibition of induction motors. – Moscow: Energoizdat. – 1981. – 184 p. [in Russian]

8. GOST 7217-87. Rotating electrical machines. Induction motors. Test methods. – 1987. [in Russian]

9. Kostenko M.V. Electrical Machines. – Moscow: Gosenergoizdat, 1944. – 815 p. [in Russian]

10. Bessonov L.L. Electrical circuits with steel. – Moscow: Gostskhizdat, 1948. – 383 p. [in Russian]

11. Archangelskiy U.I. Analytical expression of the magnetization curve of electrical machines // Electricity. – 1950. – № 3. – PP. 33–37. [in Russian]

12. Bandas A.M., Savinovskij J.A., Gantsevskaya A.C. Determination of optimal polynomial approximation for basic magnetization curve // Math. universities. Electrical Engineering. – 1966. – № 12. – PP. 23–28. [in Russian]

13. Kuznetsova L.N. Approximation of the magnetization curves of the main electrical steels // Bulletin MEI. – 1976. – Iss. 287. – PP. 53–57. [in Russian]

14. Okhayan R.V. Approximation of the magnetization curve were sending a quadratic function // Electricity. – 1998. – № 4. – PP. 70–75. [in Russian]

15. Rodkin D.I. Instantaneous power inductor with saturation // Electrical machinery and electrical equipment. Problems of automated electric. Theory and Practice. – Odesa, 2006. – Iss. 66. – PP. 282–285. [in Russian]

16. Rodkin D.I., Ogar V.O., Romashihin Yu.V. Separation of components on the iron loss of electrical machines // Transaction Dneprodzerzhinsk State Technical University. – Dneprodzerzhinsk: DSTU, 2007. – PP. 495–500. [in Russian]

17. Ogar V.A., Rodkin D.I., Kalinov A.P. Justification analytical evaluation of losses in saturated steel induction motor // Transaction Kremenchuk State Polytechnic University.

– Kremenchuk: KSPU, 2007. – Iss. 4/2007 (45), part 1. – PP. 98–103. [in Russian]

18. Rodkin D.I. Martynenko V.A., Barvynok D.V., Geraskin A.S. Energoprotsess in asynchronous motor with a saturated steel // Transaction KSPU, 2002. – 1/2002. – PP. 174–180. [in Russian]

19. Boglietti A., Cavagnino A., Ionel D.M., Popescu M., Staton D.A. A General model to predict the iron losses in inverter fed induction motors, Vaschetto S. // IEEE Transactions on Industry Applications. – Iss. 46, № 5. – PP. 1882–1890. – ISSN: 0093–9994.

20. Herranz Gracia M., Lange E., Hameyer K. Numerical Calculation of Iron Losses in Electrical Machines with a Modified Post-Processing Formula // Proc. of 16th Compumag, Aachen. – 2007.

21. Lotten T., Pillay M.P., Singampalli N.A. Lamination Core Loss Measurements in Machines Operating with PWM or Non-sinusoidal Excitation // Proc. Electr. Machines Drives Conf., Jun. 1–4, 2003. – Iss. 2. – PP. 743–746.

22. Tamm I.E. Fundamentals of the theory of electricity. – Moscow: Nauka, 1976. – 616 p. [in Russian]

23. Korn G.A., Korn T.M. Mathematical Handbook for Scientists and Engineers. – Moscow: Nauka, 1978. – Р. 277. [in Russian]

M. Yukhimenko (download)

The questions of design and research of power efficiency are consider induction motors at multivariable variations of combinations of regime, types of loading, method of voltage modulation and parameters of pulse voltage converter. The method of calculation of changes of losses in induction motors, with voltage converters in circuit of stator is developed, different the account of method pulse-width modulation of voltage, frequency and duty cycle. Research and prognostication of change power efficiency of work was executed induction motors at the change of parameters of impulsive and unnominal feed-in voltage and loading. The methods of increase of power efficiency of work are offered induction motors by the purposeful change of combination of regime.

Key words: induction motor, AC voltage converter, quality of transformation of energy, mathematical model, pulse-width modulation.

1. Ivanov–Smolensky A.V. Electrical Machines: Textbook for high schools. – Moscow: Energiya, 1980. – 928 p. [in Russian]

2. Ivobotenko B.A., Ilyinsky N.F., Kopylov I.P. Design of experiments in electrical engineering. – Moscow: Energiya, 1971. – 185 p. [in Russian]

3. Krasovskiy G.I., Filaretov G.F. Design of experiments. – Minsk: Izdat. BSU, 1982. – 302 p. [in Russian]

4. Moysyuk B.N. Fundamentals of the theory of experimental design: the manual. – Moscow: Publishing MEI, 2005. – 464 p. [in Russian]

5. Cosackov J.B., Andreev V.A. Study the effects of fluctuations in the mains voltage energy performance of asynchronous motors // Proceedings of V Russian scientific and technical conference "Energy efficiency in municipal services, energy, industry". – Ulyanovsk: Ulyanovsk State Technical University, 2006. – T. 1. – PP. 131–134. [in Russian]

6. Kopylov I.P. Electrical Machines: Textbook for schools. – Moscow: Visshaya shkola, 2002. – 607 p. [in Russian]

7. Marshak E.L. Repair and modernization of induction motors. – Moscow: Energiya, 1976. – 147 p. [in Russian]

D. Reznik (download)

Analysis and the possibility of application of a method based on the use of low-frequency supply voltage to determine the electromagnetic parameters of different types of asynchronous engines. In the low-frequency supply voltage there is a significant change of value of resistance of electric machines, which allows you to use these features in determining the electromagnetic parameters of the engines.

Key words: asynchronous motor, equivalent circuit, electromagnetic parameters of the motor

1. Kostenko M.P., Piotrovskiy L.M. Electrical Machines. Alternating current machines. – Moscow–Leningrad: Gosenergoizdat, 1958. – 651 p. [in Russian]

2. Voldek А.I. Electrical Machines. – Leningrad: Energiya, 1974. – 840 p. [in Russian]

3. Rodkin D.I, Kalinov A.P Romashihin Y.V. The development of methods to assess the frequency parameters of AC motors // Transaction KDPU. – Kremenchuk: KDPU, 2005. – Iss. 5/2005 (34). – РР. 43–46. [in Ukrainian]

4. Romashihin Y.V., Rodkin D.I. Identification of the function parameters of induction motors with a pseudo-polyharmonic influence // Alternating Current Electrical Drives: Proceeding of the Fifteenth International Scientific-Technical Conference. – Ekaterinburg, 12–14 march 2012. – РР. 67–71. [in Russian]

5. Thomson W.T., Fenger M. Case Histories of Current Signatura Analysis to Detect Faults in Induction Motor Drives. Electrical Machines and Drives // IEMDC IEEE. – June 2003. – Iss. 3. – PP. 1459–1465.

6. Payne B.S., Ball A., Gu F. Detection and Diagnosis on Induction Motor Faults using Statistical Measures // International Journal of Condition Monitoring and Diagnostics Engineering Management. – Apr. 2002. – Iss. 5, № 2. – РР. 5–19.

7. Thomson W.T., Fenger M. Current Signature Analysis to Detect Induction Motor Faults // IEEE Industry Applications Magazine. – Jul. 2001. – РР. 26–34.

8. Kalinov A.P, Reznik D.V, Rodkin D.I, Romashihin Y.V. Identification of electromagnetic parameters of induction motors with power voltage low frequency // Transaction KDPU. – Kremenchuk: KDPU, 2006. – Iss. 4/2006 (39), part 1.– PP. 117–121. [in Ukrainian]

9. Reznik D.V., Rodkin D.I., Romashihin Y.V. Features of the definition of electromagnetic parameters of induction motors using low-frequency test voltage // Alternating Current Electrical Drives: Proceeding of the Fourteenth International Scientific-Technical Conference. – Ekaterinburg, 2007. – PP. 279–283. [in Russian]

10. Reznik D.V., Rodkin, D.I, Chornyi A.P. For definition of parameters of asynchronous engines in different frequency test voltage // Electromechanical and energy saving up systems. – Kremenchuk: КrNU, 2012. – Iss. 3/2012 (19). – PP. 556–568. [in Ukrainian]

Information systems and technologies. Mathematical modeling

M. Kobylianskii, A. Serdiuk, A. Velichko (download)

The requirements to modern laboratory facilities for the disciplines "Automatic Electric model industrial machinery" and "Automation of standard processes." The examples of the modernization of the physical model of the ventilation system and the possibilities of such a complex.

Key words: laboratory facilities, innovative approach, the physical model, the ventilation system.

1. Pritchenko A.V., Kalinov А.P., Melnikov V.A. Application of small-scale physical models for research of elektric drives control system // Transaction of KDPU. – Kremenchuk: KDPU, 2010. – Iss. 3/2010 (62). – РР. 184–188. [in Russian]

2. Barbina E.S., Semichenko V.A. The idea of integration, consistency and integrity in the theory and practice of higher education. – Mode of access: http://www. nbuv. .pdf.

3. Gladir A.І., Pupinіn S.P. Kontseptsіya vikladannya cycle spetsіalnih distsiplіn fahovoї pіdgotovki іnzhenerіv-elektromehanіkіv // Transaction of KDPU. – Kremenchuk: KDPU, 2008. – Iss. 3/2008 (50). – РР. 54–57. [in Russian].

4. Novikov A.V., Povernov E.S., Siping E.V. Laboratory training complex with remote access via the Internet. – Mode of access: http://elib. altstu. ru/elib/books /Files/ pv2006_02_2/ pdf/101novikov .pdf.

5. Pertsovsky N.I. Laboratory automation: the organization of modern instrumental complex systems experimentation and testing. – Mode of access: http://www. actech. ru/files/pdf/RMMAG200506. pdf.

Information - communication technologies at education

N. Machynska (download)

The article describes the theoretical aspects of the concepts of "competence", "professionalism", "professional competence", "psychological competence", the author justifies the need for the formation of psychological competence as an important part of professional competence of future specialists.

Key words: professionalism, competence, professional competence, psychological competence.

1. Belolipetskii V.K., Pavlova L.G. Ethics and culture of control: a training manual. – Mоskow: ICC "Mart", 2004. – 384 p. [in Russian]

2. Gorkunenko P. Professional competence of the teacher teaching university and II levels of accreditation in the context of European integration [Electronic Resource] // Nova Pedagogіchna Dumka. – 2010. – № 1. – Mode of access: Soc_Gum/Npd/2010_1/Gorkunen.pdf [in Ukrainian]

3. Gromkova M.T. Psychology and pedagogy career: studies. manual for schools. – Mоskow: UNITY–DANA, 2003. – 415 p. [in Russian]

4. Isaev E.I. Psychology in Higher Education: a design problem of psychological education teacher // Questions of psychology. – 1997. – № 6. – PP. 48–57. [in Russian]

5. Kalinin V.A. Professional competence of future teachers of foreign language means the dialogue of cultures: dis. ... candidate ped. sciences: 13.00.04. – Zhitomir, 2005. – 311 p. [in Ukrainian]

6. Kuzmina N.V. Professional identity of teachers and trainers. – Mоskow, 1990. – 190 p. [in Russian]

7. Pervutinsky V.G. Current approaches to the development of professional competence of students: monograph. – SPb., 2002. [in Russian]

8. Psychological dictionary / ed. A.V. Petrovsky, M.G. Yaroshevsky. – Mоskow: Politizdat, 1990. – 494 p. [in Russian]

9. Sitarova V.A. Allowance for the practical exercises: studies. allowance for stud. High. Textbook. institutions / Ed. V.A. Slastenina. – Mоskow: Publishing Center "Academiya", 2008. – 352 p. [in Russian]

10. Chaplak M., Kotova S. Trends professional competence of future teachers // Modern Questions of the World Science. – 2010. – 258 p. [in Ukrainian]

I. Konokh, Ye. Knizhnik (download)

An approach to the creation of a discrete controller as artificial feedforward neural network, which consisting of three single neurons with linear activation function is outlined. Control setting is in accordance with the training of the neural network algorithm, based on the analysis of the quality criterion. Development can be adapted to the control of the power converter, the engine. Software developed on environment LabView 8.X. It visualizes the control process, analyzing the control quality and is used in the learning process.

Кey words: neural network, optimization.

1. Omatu S., Khalid M., Yusof R. Neuro-Control and its application. – Corrected edition. – Springer, 1996. – 255 р. – ISBN 3540199659.

2. Computerized laboratory system for the study of intelligent digital control systems of electric drive / I.S. Konokh, V.V. Nayda, I.S. Gula // Transaction of Kremenchuk Mykhailo Ostrohradskyi State University. – 2008. – Iss. 4/2008 (51), part 1. – PP. 17–21. [in Ukrainian]

3. Travis J. LabVіEW for Everyone / Translate from English Klushin N.А. – Мoscow: DMK Press; Pribor Complekt, 2005. – 544 p. [in Russian]

4. Vinogradova N.A., Listratov Y.I., Sviridov E.V. Develop application software in an environment LabVіEW: Tutorial. – Moscow: MEI, 2005. – 245 p. [in Russian]

Ecology and environmental safety. Vital safety and labor protection

O. Chornyi, V. Nykyforov (download)

The authors have substantiated the urgency of assessment of electromagnetic impact of the electromechanical energy converters on biological objects. The article is focused on the AC electric drives equipped with induction motors, which are the load of the semiconductor PWM-controlled energy converters supplying. The experimental research results, obtained by the authors, are presented for the magnetic field intensity around the induction motors that are supplied by the PWM-controlled frequency converters with the supply asymmetry. The first attempt was made to determine the maximum permissible level of electromagnetic radiation, which is the teratogen, e.g. mutagen, for the Drosophila melanogaster biological test-objects.

Key words: energy conversion, AC electric drive, electromagnetic radiation, maximum permissible level, bioassay, test-objects, teratogenesis, mutations.

1. Kuznetsov B.I., Pelevin D.Е., Bovdui I.V. and oth. Compensation of distortions of a power-frequency magnetic field // Electromechanical and energy-saving systems. Special issue «Problems of automated electric. Theory and Practic». – Kremenchuk: KrNU, 2012. – Іss. 19/3 (2012). – РР. 135–136. [in Russian]

2. Dunaev B.N. Electromagnetic radiation and people health risk when using cellular communications // Hygiene and sanitation. – 2007. – № 6. – РР. 56–57. [in Russian]

3. Maximum permissible level of 50 Hz magnetic fields. – Kharkiv, 1986. – SN–3206–85,2. [in Russian]

4. Spodobaev Yu.M, Kubanov V.P. Fundamentals of electromagnetic ecology. – Мoscow: Radio i sviaz, 2000. – 240 p. [in Russian]

5. Health and safety regulations for people EMI protection from the fields produced by  AC overhead transmission lines of industrial frequency SN № 2971–84. – Moscow, Minzdrav SSSR, 1984. [in Russian]

6. Sanitary and epidemiological standards and regulations. Sanitary and epidemiological requirements for residential buildings and facilities. San–PiN–00. – Moscow, Minzdrav Rossii, 2001. [in Russian]

7. Sanitary and epidemiological standards and regulations. Electromagnetic fields in production environment. San–PiN – Moscow: Minzdrav Rossii, 2003. [in Russian]

8. Magnetic field and biological organism. – Access mode: [in Russian]

9. Dovbysh V.N., Maslov М.Yu., Spodobaev Yu.М. Electromagnetic safety of elements in power systems: Monograph. – Samara: OOO IPK “Sodruzhestvo”, 2009. – 198 р. [in Russian]

10. Stepanov А.N. Modelling of an external magnetic field of a three-phase electric machine. – Access mode: [in Russian]

11. The development of theory of an external magnetic field of induction motors, ways for its reduction and measuring. – Access mode: [in Russian]

12. EMI impact on living organisms. – Access mode: [in Russian]

Results of work and development prospects of the scientific directions

M. Zagirnyak, N. Gordienko, D. Reznik (download)

The basic stages of Kremenchuk Mykhailo Ostrohradskyi National University from the general technical department of Poltava Institute of Agricultural Engineering to the National University are presented. It is emphasized that today it is the only in Kremenchuk state diversified university of
IVth level of accreditation which provides training in four levels, dynamic and successfully works to resolve the problems of access of youth to higher education while improving its quality. The history of the Institute of Electromechanics, Energy Management Systems and the Achievements of the Department of automatic control systems and electric drive are considered.

Key words: multi-university, National University, IV level of accreditation, research schools KrNU.

1. The road to recognition (Historical Sketches). Scientific and popular publications. – Komsomolsk: SVD Oleksienko V.V., 2010. –188 р. [in Ukranian]

2. Zagirnyak M.V. Research Kremenchuk Mykhailo Ostrohradskyi National University // Electromechanical and energy saving systems. Thematic issue "Problems automated electric. Theory and рractice scientific production. – Kremenchuk: KrNU, 2012. – Iss. 3/2012 (19). – PP. 26–28. [in Ukranian]

3. Site Kremenchuk Mykhailo Ostrohradskyi National University [electronic resource]. – Mode of access: [in Ukranian]

4. Gladyr A.I. Gordienko M.G., Chornyi O.P. Towards an European Research Area // Electromechanical and energy systems, methods of modeling and optimization. Proceedings of the VIII Ukrainian scientific-technical conference of young scientists and specialists in Kremenchuk 08–09 April 2010. – Kremenchuk: KSU, 2010. – PP. 21–23. [in Ukranian]

5. Site of department «Automatic control system and electric drive» [electronic resource]. – Mode of access: [in Ukranian]

6. Department of «Automatic Control and Electric Drive». Experience. Achievements. Prospects. – Kremenchuk: KrNU, 2012. – 312 p. [in Ukranian]

7. Information about scientific and scientific-technical activity in 2011. – Kremenchuk: KrNU, 2012. – 97 p. [in Ukranian]